Imikhiqizo
Polystyrere flat punched tape carched carched tape
ISinho inikezela nge-punched carched carched carched tape eyenzelwe izinhlelo zokusebenza zetheyipu kanye ne-reel, kufaka phakathi ama-reels anengxenye. Iyahambisana nohla olubanzi lwe-SMT Pick bese ubeka ama-feeders. Itheyipu yethu ye-Carched Carked ye-Flat itholakala ngobukhulu obuhlukahlukene nosayizi, ngezinketho zezinto ezibonakalayo kufaka phakathi i-polystyrene ecacile nenhle, i-polycarbonate ekhanyayo, i-polyethylene terephthalate, nephepha elimhlophe. Ngokwengeziwe, le teyipu eshayiwe ingahlukaniswa ama-reels akhona e-SMD ukuze anwebe ubude bawo, ukunciphisa imfucuza.
I-Polycarbonate (PC) I-Flat Pourched Carked Carked Parched Tape iyindlela yokuqhuba izinto ezimnyama ezenzelwe izihlangu ezivela ekukhipheni ngogesi (i-ESD). Iza ebangeni lobukhulu, kusukela ngo-0.30mm kuya ku-0.60mm, futhi iyatholakala ebubanzi beteyiphu ehlukahlukene, kusukela ngo-4mm futhi kukhuphukele ku-88mm.
Bonisana
| Yakhiwe kusuka ku-polycarbonate emnyama eqhutshwa ngokuvikelwa kwe-ESD | Kutholakala ngobubanzi obukhulu obukhulu: 0.30mm kuya ku-0.60mm | Amasayizi atholakalayo: 4mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, ngisho naku-88mm | ||
| Ifanelana kakhulu i-SMT Pits bese ubeka ama-feeders | Kunikezwe ubude bamamitha angama-400, amamitha angama-500, namamitha ayi-600 | Ubude obufanele bungahlinzekwa |
Ububanzi obukhona
-Banzi8-24mm nje ngezimbobo zeSprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 12.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 16.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 24.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
-Banzi32-88mm ngezimbotshana zeSprocket nezimbobo ze-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Izakhiwo Ezijwayelekile
| Amabhalane | Sinho | |
| Umbala | -Mnyama | |
| Into uqobo lwayo | I-Polystyrene (PS) iyasebenza | |
| Ububanzi obuphelele | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Ukujiya | I-0.3mm, 0.4mm, 0.5mm, 0.6mm noma obunye ubukhulu obudingekayo | |
| Ubude | I-400m, 500m, 600m noma amanye ubude benkambiso |
Izakhiwo Ezibonakalayo
I-PS iyaqhuma
| Izakhiwo Ezibonakalayo | Indlela yokuhlola | Umuvo | Thanda |
| Amandla adonsela phansi athile | I-ASTM D-792 | g / cm3 | 1.36 |
| Izakhiwo zemishini | Indlela yokuhlola | Umuvo | Thanda |
| Amandla athambile @yield | I-ISO527-2 | MPA | 90 |
| Tensile elongation @break | I-ISO527-2 | % | 15 |
| Izakhiwo zikagesi | Indlela yokuhlola | Umuvo | Thanda |
| Ukumelana Nobubanzi | I-ASTM D-257 | Ohm / sq | / |
| Indlela yokuhlola | Umuvo | Thanda | |
| Ukushisa kokushisa kokushisa | Iso75-2 / b | ℃ | 75 |
| -Phathelene nokubona Izakhiwo | Indlela yokuhlola | Umuvo | Thanda |
| Ukuhambisa okukhanyayo | ISO-13468-1 | % | 91.1 |
Impilo yeshelufu nesitoreji
Sebenzisa kungakapheli unyaka ongu-1 wosuku lokukhiqiza. Gcina emaphaketheni asekuqaleni, endaweni elawulwayo enamazinga okushisa angu-0- 40 ℃ kanye nomswakama <65% RHF. Vikela kumswakama nokukhanya kwelanga okuqondile.
Uklombu
Ihambisana ne-EIA-481 ejwayelekile, eqinisekisa i-camber ayidluli i-1mm kuzo zonke izikhathi ezingama-250mm.
Izinsizakusebenza
| Izakhiwo ezibonakalayo zezinto zokwakha | Ishidi Ledatha Yokuphepha Kwezinto Ezibonakalayo |
| Umbhalo | Imibiko ehlolwe ngokuphepha |
