Imikhiqizo
I-PolySTYYNERNE CLEAR FLAT PUPCHED PORCHED PORCHED PORCHERE
I-tepi ye-Sinho's Flat Carched Carched iguquguqukayo, iza ngobukhulu obuhlukile nosayizi, kufaka phakathi i-polystyrene ecacile nensundu, i-polycarbonate ekhanyayo, ecacile ye-polyethylene terephthalate, kanye nezinto zokwakha ezimhlophe. I-Polystyrerererererererererererererererererererererererererererererererererered tepi yenzelwe ngokukhethekile yenzelwe amatheyiphu kanye nabaholi be-reel kanye nama-trailer for trailent reels reels okuyingxenye. Iyahambisana nokukhetha okuningi kwe-SMT kanye nama-feeders futhi kungahlukaniswa kuma-reels akhona we-SMD ukwelula ubude bawo, ukunciphisa imfucuza.
I-Polystyrere (PS) I-Peretha Yesithwali Esikhonkwani Yesikhumba ye-Planched yenziwa kusuka ezintweni ezicacile ze-antistatic super ezihlahleni ezihlangu ezivela ku-Electrostatic Depecture (ESD). It's offered in various thicknesses ranging from 0.30mm to 0.60mm and is available in a wide selection of tape widths, spanning from 4mm to 88mm.
Bonisana
| Kwakhiwe kusuka ku-antistatic super polystyrene impahla ye-ESD ukuvikela | Etholakala ngobukhulu obuhlukahlukene: 0.30mm, 0.40mm, 0.50mm, 0.60mm | Amasayizi atholakalayo atholakala ifomu 4mm ngisho naku-88mm | ||
| Iyahambisana nabo bonke abakhethiweyo bakha indawo | Ubude obukhona: 400m, 500m, 600m | Ubude obungokwezifiso nosayizi bungahlinzekwa |
Ububanzi obukhona
-Banzi8-24mm nje ngezimbobo zeSprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 12.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 16.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 24.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Ububanzi 32-88mm onezimbobo ze-sprocket kanye ne-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Izakhiwo Ezijwayelekile
| Amabhalane | Sinho | |
| Umbala | Kucacelwe isidlo sakusihlwa | |
| Into uqobo lwayo | I-Polystyrene (PS) Antistatic | |
| Ububanzi obuphelele | I-4mm, 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 7mm, 88mm | |
| Ukujiya | I-0.3mm, 0.4mm, 0.5mm, 0.6mm noma ubukhulu obudingekayo buyatholakala | |
| Ubude | I-400m, 500m, 600m, noma ubude obufanelekile ngemuva kwesicelo |
Izakhiwo Ezibonakalayo
I-PS Isidlo sakusihlwa i-antistatic
| Izakhiwo Ezibonakalayo | Indlela yokuhlola | Umuvo | Thanda |
| Amandla adonsela phansi athile | I-ASTM D-792 | g / cm3 | 1.08 |
| Izakhiwo zemishini | Indlela yokuhlola | Umuvo | Thanda |
| Amandla athambile @yield | I-ISO527 | 37.2 | |
| Amandla ashubile @break | I-ISO527 | Kg / cm2 | 35.4 |
| Tensile elongation @break | I-ISO527 | % | 78 |
| Izakhiwo zikagesi | Indlela yokuhlola | Umuvo | Thanda |
| Ukumelana Nobubanzi | I-ASTM D-257 | Ohm / sq | 109~11 |
| Izakhiwo ezishisayo | Indlela yokuhlola | Umuvo | Thanda |
| Ukushisa kokushisa kokushisa | I-ASTM D-648 | ℃ | 62 |
| Ukubumba shrinkage | I-ASTM D-955 | % | 0.004 |
| -Phathelene nokubona Izakhiwo | Indlela yokuhlola | Umuvo | Thanda |
| Ukuhambisa okukhanyayo | % | 91.3 | |
| Udizima | Iso 14782 | % | 17.8 |
Impilo yeshelufu nesitoreji
Impilo yeshelufu yomkhiqizo: unyaka owodwa lapho igcinwe kahle. Gcina ukufakwa kwasekuqaleni ngo-0 ℃ kuya ku-40 ℃, ngokuswakama okuhlobene <65% RHF. Vikela kumswakama nokukhanya kwelanga okuqondile.
Uklombu
Ihlangabezana ne-EAIA-481 ejwayelekile ye-EIA-481 ejwayelekile, eqinisekisa i-camber ayidluli i-1mm ngo-250 millimeter ubude.
Izinsizakusebenza
| Izakhiwo ezibonakalayo zezinto zokwakha | Ishidi Ledatha Yokuphepha Kwezinto Ezibonakalayo |
| Umbhalo | Imibiko ehlolwe ngokuphepha |
