Imikhiqizo
Polyethylene terephthalate flat punched tape tepler carcher
ISinho inikeza uhla lwamateyipu othwala ofuyiwe eshayiwe ngezinto ezihlukile, kufaka phakathi i-polystyre ecacile nenhle, i-polycarbonate ekhanyayo, i-polyethylene terephthalate (pet) nephepha elimhlophe. I-Pelyethylene Terephthalatate (Pet) Parched Carched Tarched Tape ye-Tape Pourched yenzelwe amatheyiphu kanye nabaholi be-reel kanye nama-trailer for trailer ama-reels anengxenye, iyahambisana ne-SMT PICK bese ubeka. Le tampu eshayiwe nayo ingahlukaniswa kuma-reels akhona e-SMD ukuze anwebe ubude bawo futhi anciphise imfucuza.
I-polyethylene terephthalate (pet) ithanga le-tranched carched cape iyinto ecacile yokufaka insudative. Kuhlinzekwa ngobukhulu obungu-0.3mm, 0.4mm, 0.5mm, kanye no-0.6mm, ngokukhethwa okubanzi kobubanzi beteyipu kusuka ku-4mm kuya ku-88mm kuya ku-88mm kuya ku-88mm. Ukwenza ngokwezifiso zombili ubukhulu nobude kuyatholakala ngesicelo.
Bonisana
| Eyenziwe nge-polyethylene terephthalate ecacile | Enikelwe ebangeni elibanzi lobukhulu, kusuka ku-0.30mm kuya ku-0.60mm | Usayizi otholakala uhlukahluka kusuka ku-4mm kuya ku-88mm | ||
| Iyahambisana nohlobo oluhlukile lokukhetha i-SMT bese ubeka ama-feeders | Lo mkhiqizo uza ubude bama-400m, 500m, kanye ne-600m | Osayizi nobude obude bungabekwa |
Ububanzi obukhona
-Banzi8-24mm nje ngezimbobo zeSprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 12.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 16.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 24.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
-Banzi32-88mm ngezimbotshana zeSprocket nezimbobo ze-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Izakhiwo Ezijwayelekile
| Amabhalane | Sinho | |
| Umbala | -Cwebile | |
| Into uqobo lwayo | Polyethylene terephthalate (pet) insurative | |
| Izinketho Zobubanzi zifaka | I-4mm, 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 7mm, no-88mm | |
| Ukujiya | faka u-0.3mm, 0.4mm, 0.5mm, 0.6mm, noma ubukhulu besiko njengoba kudingeka | |
| Ubude | I-400m, 500m, 600m, noma ubude obuhle ngezifiso |
Izakhiwo Ezibonakalayo
| Izakhiwo Ezibonakalayo | Indlela yokuhlola | Umuvo | Thanda |
| Amandla adonsela phansi athile | I-ASTM D-792 | g / cm3 | 1.36 |
| Izakhiwo zemishini | Indlela yokuhlola | Umuvo | Thanda |
| Amandla athambile @yield | I-ISO527-2 | MPA | 90 |
| Tensile elongation @break | I-ISO527-2 | % | 15 |
| Izakhiwo zikagesi | Indlela yokuhlola | Umuvo | Thanda |
| Ukumelana Nobubanzi | I-ASTM D-257 | Ohm / sq | / |
| Indlela yokuhlola | Umuvo | Thanda | |
| Ukushisa kokushisa kokushisa | Iso75-2 / b | ℃ | 75 |
| -Phathelene nokubona Izakhiwo | Indlela yokuhlola | Umuvo | Thanda |
| Ukuhambisa okukhanyayo | ISO-13468-1 | % | 91.1 |
Impilo yeshelufu nesitoreji
Lo mkhiqizo ugcina ikhwalithi yawo unyaka owodwa ngaphansi kwezimo zokugcina ezinconyiwe: gcina ekufakweni kwayo kwasekuqaleni, gcina phakathi kuka-0 ℃ kuya ku-40 ①, futhi uvikele ukukhanya kwelanga ngqo kanye nomswakama
Uklombu
Ihlangabezana nezinga lamanje le-EIA-481 le-camber elingekhulu kune-1mm ngobude obungama-250 millimeters.
Izinsizakusebenza
| Izakhiwo ezibonakalayo zezinto zokwakha | Umbhalo |
| Imibiko ehlolwe ngokuphepha |
