Imikhiqizo
I-polycarbonate flat punched peppered pense
I-SINHO FLAT TARK CARLCED TARKCH TARKIWETIWE ITHUNYELWE YEZOBUCHWEPHESHE BOKUTHENGA KWAMAHHALA KANYE NE-TRALEL YOKUQHAWULA KAKHULU, futhi kufanelekile ukusetshenziswa nge-SMT Pick kanye ne-FOODERS. I-tape ye-Sinho's Flat Courched Carked iyatholakala ukuthi ikhiqizwe nohla lwebhodi lobukhulu kanye nosayizi wetheyipu ezindaweni ezicacile nezimnyama zezinto ezibonakalayo ezimnyama, izinto ezimnyama zePolycaryne, izinto zephepha ezimhlophe. Le tampu ethuliwe ingahlukaniswa ngama-reels akhona we-SMD ukunweba ubude futhi ugweme imfucuza.
I-Polycarbonate (PC) I-Plan Pourched Carked Carked Tape iyindlela yokuvuselela izinto ezimnyama ezivikela izingxenye ezivela ku-electrostatic decus (eSD). Lokhu okuqukethwe kutholakala kuhla lwebhodi lobukhulu kusuka ku-0.30mm kuya ku-0,60mm ukuthola i-tepe ehlukahlukene ebanzi kusuka ku-4mm kuze kube ngu-88mm kuze kube ngu-88mm.
Bonisana
| Eyenziwe nge-polycarbonate eqhuba impahla emnyama evikela ku-ESD | Kutholakala kuhla lwebhodi lobukhulu kusuka ku-0.30 kuye ku-0.60mm | Osayizi abatholakala kusuka ku-4mm kuze kube ngu-88mm | ||
| Kufanelekile kukho konke ukukhethwa okukhulu kwe-SMT bese ubeka ama-feeders | Kutholakala ngo-400m, 500m, ubude be-600m | Ubude benkambiso buyatholakala |
Ububanzi obukhona
-Banzi8-24mm nje ngezimbobo zeSprocket
| SO | E | PO | DO | T | |
| / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 12.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 16.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 24.00 ±0.30 | / | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Ububanzi 32-88mm onezimbobo ze-sprocket kanye ne-elliptical
| W | SO | E | PO | DO | T |
| 28.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 | |
| 44.00 ±0.30 | 40.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
| 56.00 ±0.30 | 52.40 ±0.10 | 1.75 ± 0.10 | 4.00 ± 0.10 | I-1.50 + 0.10 / -0.00 | 0.30 ± 0.05 |
Izakhiwo Ezijwayelekile
| Amabhalane | Sinho | |
| Umbala | -Mnyama | |
| Into uqobo lwayo | I-Polycarbonate (PC) iyaqhuba | |
| Ububanzi obuphelele | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Ukujiya | I-0.3mm, 0.4mm, 0.5mm, 0.6mm noma obunye ubukhulu obudingekayo | |
| Ubude | I-400m, 500m, 600m noma amanye ubude benkambiso |
Izakhiwo Ezibonakalayo
| Izakhiwo Ezibonakalayo | Indlela yokuhlola | Umuvo | Thanda |
| Amandla adonsela phansi athile | I-ASTM D-792 | g / cm3 | I-1.25 |
| Isikhunta shrinkage | I-ASTM D955 | % | 0.4-0.7 |
| Izakhiwo zemishini | Indlela yokuhlola | Umuvo | Thanda |
| Amandla asheshayo | I-ASTM D638 | I-MPA | 65 |
| Amandla aguqukayo | I-ASTM D790 | I-MPA | 105 |
| I-Flexiral modulus | I-ASTM D790 | I-MPA | 3000 |
| Amandla we-Ithod Ithod Ithod (3.2mm) | I-ASTM D256 | J / m | 300 |
| Izakhiwo ezishisayo | Indlela yokuhlola | Umuvo | Thanda |
| Inkomba ye-Flow Flow | I-ASTM D1238 | g / 10min | 4-7 |
| Izakhiwo zikagesi | Indlela yokuhlola | Umuvo | Thanda |
| Ukumelana Nobubanzi | I-ASTM D-257 | Ohm / sq | 104~5 |
| Izakhiwo ezivuthayo | Indlela yokuhlola | Umuvo | Thanda |
| Isilinganiso se-Flame @ 3.2mm | -Ngaphakathi | NA | NA |
| Izimo Zokucubungula | Indlela yokuhlola | Umuvo | Thanda |
| Ukushisa kwe-Barrel | | ° C | 280-300 |
| Izinga lokushisa le-Main | | ° C | 90-110 |
| Ukushisa okushisa | | ° C | 120-130 |
| Isikhathi sokusoma | | Ihora | 3-4 |
| Ingcindezi yomjovo | I-Med-High | ||
| Bamba ingcindezi | I-Med-High | ||
| Isikulufa isikulufa | -Ngeqile | ||
| Ingcindezi emuva | -Ehlile | ||
Impilo yeshelufu nesitoreji
Umkhiqizo kufanele usetshenziswe kungakapheli unyaka owodwa kusukela ngosuku lokukhiqiza. Gcina emaphaketheni alo okuqala endaweni elawulwa isimo sezulu lapho izinga lokushisa lisuka ku-0 ~ 40 ℃, umswakama ohlobene <65% RHF. Lo mkhiqizo uvikelekile elangeni eliqondile
Uklombu
Ihlangabezana nezinga lamanje le-EIA-481 le-camber elingekhulu kune-1mm ngobude obungama-250 millimeters.
Izinsizakusebenza
| Izakhiwo ezibonakalayo zezinto zokwakha | Umbhalo |
| Imibiko ehlolwe ngokuphepha |
