Imikhiqizo
I-Flat Punch Carrier Tape ene-Cover Tape
I-Sinho's Flat Punched Carrier Tape iklanyelwe ukusetshenziselwa abaholi be-Tape ne-Reel kanye nama-trailer ama-reel ezingxenye, futhi ingasetshenziswa neziphakeli eziningi ze-SMT. I-Sinho inikeza uchungechunge lwe-Flat Punched Carrier Tapes ngobukhulu obuhlukahlukene nosayizi, atholakala nge-polystyrene ecacile nemnyama, i-polycarbonate emnyama, i-polyethylene terephthalate ecacile, nezinto zephepha ezimhlophe. Le tape ebhontshiwe ingahlanganiswa kumareli e-SMD akhona ukuze kunwetshwe ubude futhi kugwenywe ukumosha.
Le nto iyitheyiphu yenethiwekhi emnyama ye-polystyrene eyisicaba ecijile evalwe nge-Heat Activated Cover Tape (SHHT32 series) futhi inikezwa ngemicu eyodwa kuneroli. Itheyiphu ye-polystyrene punched itholakala ezinhlobonhlobo zogqinsi kusuka ku-0.30mm kuya ku-0.60mm ochungechungeni lwebhodi lobubanzi obusuka ku-4mm kuya ku-88mm. Futhi ububanzi bekhava ye-SHHT 32 yochungechunge emboziwe ye-Heat Activated Cover Tape buncike kumasayizi wetheyiphu ekhonjiwe.
Imininingwane
| I-Polystyrene conductive flat tape yenkampani yenethiwekhi enekhava eyenziwe yasebenza ngokushisa (uchungechunge lwe-Sinho SHHT32) | Itheyiphu ekhonjiwe inikezwa ngokuqina okusuka ku-0.30mm kuya ku-0.60mm. | Itheyiphu ekhonjiwe osayizi abatholakalayo ukusuka ku-4mm ukuya ku-88mm | ||
| Ububanzi bekhava yekhava ye-HSA evaliwe buncike kutheyiphu ebhontshiwe eyisicaba
| Ifanele zonke iziphakeli ezinkulu ze-SMT | Ihlinzekwa ngawodwana hhayi kuma-roll |
I-Flat Punch Carrier Tape
| Okubalulekile | I-Polystyrene Emnyama |
| Over Width | 8 mm, 12 mm, 16 mm, 24 mm, 32 mm, 44 mm, 56 mm, 72 mm, 88 mm |
| Ubude | Ubude obenziwe ngendlela oyifisayo ngendlela yemichilo eyodwa |
Izinto ezibonakalayo
I-PS Conductive
| Izakhiwo Zomzimba | Indlela yokuhlola | Iyunithi | Inani |
| I-Gravity ethize | I-ASTM D-792 | g/cm3 | 1.06 |
| Izakhiwo Zemishini | Indlela yokuhlola | Iyunithi | Inani |
| Amandla Aqinile @Yield | ISO527 | Mpa | 22.3 |
| Amandla Aqinile @Break | ISO527 | Mpa | 19.2 |
| I-Tensile Elongation @Break | ISO527 | % | 24 |
| Izakhiwo zikagesi | Indlela yokuhlola | Iyunithi | Inani |
| Ukumelana Nobuso | I-ASTM D-257 | Om/sq | 104~6 |
| Izakhiwo ezishisayo | Indlela yokuhlola | Iyunithi | Inani |
| Izinga lokushisa lokuhlanekezela ukushisa | I-ASTM D-648 | ℃ | 62 |
| Ukuncipha kokubumba | I-ASTM D-955 | % | 0.00725 |
Itheyiphu Yekhava Esebenze Ukushisa
| Eokokufundisa Pizindlu | OkujwayelekileInani | Indlela Yokuhlola |
| Ukumelana Nobuso (Uhlangothi Lwengxenye) | ≤1010Ω | I-ASTM-D257,Ω |
| OkomzimbaPizindlu | OkujwayelekileInani | Indlela Yokuhlola |
| Ukubukeka | Okusobala | / |
| Ubukhulu: | 0.060mm±0.005mm | I-ASTM-D3652 |
| Amandla Okuqina (kg/10mm) | ≥3 | I-ASTM D-3759,N/mm |
| Ubude (%) | ≥20 | I-ASTM D-3759,% |
| I-Haze(%) | ﹤13 | I-JIS K6714 |
| Ukucaca(%) | 85 | I-ASTMD1003 |
| Ukunamathela kutheyiphu yenethiwekhi/Ikhasi | 50 amagremu±30 amagremu | I-EIA-481 |
| Qaphela: Ulwazi lobuchwepheshe nedatha ethulwa lapha kufanele kuthathwe njengokumele noma okujwayelekile kuphela, futhi kufanele angeke isetshenziselwe izinjongo ezithile. | ||
| Chemical Pizindlu(I-ESD ayinawo ama-Amines, I-N-Octanic Acid) | ||
Izinsiza
| Izakhiwo Zomzimba Zezinto Zokusebenza | Ishidi Ledatha Yokuphepha Okubalulekile |
| Umdwebo |
